Daily safety maintenance of rotary vacuum dryer

The daily maintenance and management of the rotary Vacuum Dryer is an important work to ensure safety. Once the vacuum Dryer fails, it will cause electric shock, fire and explosion accidents, which are related to the personal safety and property safety of the staff. Therefore, the maintenance of the rotary vacuum dryer is more important.

1. The common maintenance problems in the dryer mainly include open circuit, short circuit, bad contact, etc. Protective measures should be taken before maintenance. According to the actual situation, analyze the fault cause and fault location. Find out how to solve problems and how to avoid them.

2. The maintenance of the rotary vacuum dryer should be based on the condition and form of the line and the analysis of the mechanical operation to determine which ones are prone to failure. In order to ensure the safety of the equipment, the occurrence frequency of drying engineering failures should be recorded and analyzed.

3. The maximum temperature of molybdenum disulfide complex calcium-based grease is 150 degrees in rolling bearings. Checks are required at least once a month. After the grease is found to be dry, it should be cleaned immediately and replaced with new grease.

4. The cylindrical worm reducer should be maintained according to its instructions; after the filter is dried in the tank once, the surrounding powder should be removed to make the filter body smooth; the transmission chain should be lubricated at least once a month.

5. In the rotary Vacuum Drying Equipment, the rotary bearing sealing ring used between the vacuum tube and the main engine needs to be checked regularly, and should be replaced immediately when leakage is found.

6. The operating time of the rotary vacuum Drying Equipment is usually six months to one year, and it should be checked and repaired. When repairing, it should be assembled according to the original configuration, the distance and tolerance of each part should be adjusted, and the corresponding grease should be replaced or supplemented according to regulations.

Safety is also a very important aspect of the use of the rotary vacuum dryer. When we use the rotary vacuum dryer, we must operate it according to the correct operation method to avoid the danger of the rotary vacuum dryer and ensure safety.