How to use the tunnel type hot air circulation oven safely

The tunnel type Hot air circulation oven is a continuous Drying Equipment, which can continuously bake continuously and effectively improve the production efficiency of products. A large amount of heat energy will be generated during the operation of the tunnel-type hot air circulation oven, and the rotation of the chain will generate kinetic energy. If the operation is improper, these energy will become a great safety hazard. Therefore, it is very important to understand the method of using the tunnel-type hot air circulation oven safely. important.

1. The tunnel-type hot air circulation oven should be placed in a clean room, kept dry, moisture-proof and moisture-proof to prevent corrosion.

2. The installation of the tunnel-type hot air circulation oven needs to reserve a certain space, and there must be a certain distance from the four sides to the wall, generally more than 2m.

3. Check voltage. Before use, the voltage required for the small oven is 220V, and the voltage required for the large oven is 380V, and the composite power switching power supply is installed according to the conditions of the oven. Choose the appropriate power cord. At the same time, make sure that the ground wire is also well done.

4. Before the official production, put the prepared samples into the oven, then turn on the power switch and turn on the oven. For an oven with a blower, the blower must be turned on during the heating and constant temperature process, otherwise it will affect the uniformity of the working chamber temperature and may damage the heating element. Then adjust the appropriate test temperature. The oven is in working condition.

5. Dried items should not be arranged too closely. It is forbidden to place items at the radiator at the bottom of the oven, so as not to affect the heat dissipation cycle, and it is forbidden to put inflammable and explosive items, volatile and corrosive items.

6. After drying, cut off the power before opening the studio door. Remember, it is not possible to touch the baked goods directly with your hands. We should use special tools or insulated gloves to bake items to avoid burns.

7. Keep the oven clean, and pay attention to cleaning the oven before and after use to avoid debris affecting the operation.

8. When using the oven, the temperature should not exceed the maximum operating temperature of the oven, and the general oven temperature is below 250 degrees.

It is very necessary to understand the safe use of tunnel-type hot air circulation oven, so as to avoid some potential safety hazards, reduce the occurrence of accidents, protect workers, and the property safety of the factory, so these safety precautions must be known.