HS series three-dimensional motion mixer

HS series three-dimensional Motion Mixer

Product introduction:

HS series three-dimensional motion Mixer is a high-efficiency mixing equipment, which can be used for high uniformity mixing of powdery and granular materials in pharmaceutical, food, chemical, light industry, machinery, electronics, mining and metallurgy, national defense industry, scientific research enterprises and institutions. During the mixing process, the material has no centrifugal force, no specific gravity segregation, stratification, and accumulation. The components can be mixed evenly under the disparate weight ratio, and the mixing rate is over 99.9%.

working principle:

The mixing barrel is suspended on the ends of the main and driven shafts through two Y-shaped universal joints, which are both intersecting and perpendicular to each other in space. When the driving shaft is dragged and rotated, the universal joint makes compound motions such as translation, rotation and tumbling of the bucket in space. The material follows the three-dimensional composite motion of the axial, radial and circumferential directions in the cylinder. Various materials in the cylinder flow, diffuse, and dope with each other, and finally are in a uniform state.

Uses and Features:

1. This machine is a high-efficiency mixing equipment, which can be used for high uniformity mixing of powdery and granular materials in pharmaceutical, food, chemical, light industry, machinery, electronics, mining and metallurgy, national defense industry, scientific research enterprises and institutions.

2. During the mixing process, the material has no centrifugal force, no specific gravity segregation, stratification, and accumulation. The components can be mixed evenly under the disparate weight ratio, and the mixing rate is over 99.9%.

3. The charging coefficient is high, which can reach 80% (the ordinary mixer is only about 40%) and the mixing time is short. It is an ideal product among various mixers at present. The equipment is compact in structure, and the transmission part adopts stepless speed regulation (frequency conversion or electromagnetic speed regulation), which is very convenient to operate.

4. There are arc transitions everywhere in the barrel, and it has been precisely polished to meet the requirements of GMP.