What are the design requirements of centrifugal spray dryer

The Centrifugal Spray Dryer is a kind of circulating and parallel flow Dryer. There are some requirements in the design, so what are the requirements for the design of the high-speed centrifugal Spray Dryer? Let us give you a simple introduce.

Requirements for high-speed centrifugal spray dryer:

1. In order to facilitate monitoring and inspection of the operation of the high-speed centrifugal Spray Drying Equipment, monitoring devices such as manholes, lamp holes and temperature and pressure indicating recorders should be installed.

2. To strengthen the role of air filtration, reduce impurities, improve product purity.

3. The high-speed centrifugal spray Drying Equipment should have a high recovery rate, at the same time be easy to clean and operate reliably.

4. High-speed centrifugal spray drying equipment should have good thermal insulation and airtightness, high thermal efficiency and good economic effect.

5. There are measures to prevent the hot air from generating eddy currents or countercurrents to reduce the phenomenon of coke powder.

6. In order to improve the solubility and preservation of the product, the dried product should be quickly cooled and packaged. It is required that the product should maintain its original color and fragrance after being restored by adding water.

7. For the parts in contact with the product, the high-speed centrifugal spray drying equipment should be made of stainless steel, and galvanized iron sheets, black iron sheets and aluminum materials should not be used. The surface of the drying room should be flat and smooth, which is convenient for disassembly, cleaning, sterilization and disinfection.

8. In order to prevent the danger of dust explosion, it is required that the temperature of the drying room and the exhaust air should not exceed 100 degrees.

These are the issues that we need to consider when designing a high-speed centrifugal spray dryer, and are also the corresponding design requirements, which can be designed according to these requirements.