What are the safety measures for the pressure spray dryer?

1. Explosion-proof measures of Pressure Spray Dryer

1. A blasting disc and an explosion venting valve are set on the side wall of the main tower dried by the Pressure Spray Dryer and on the top of the sub-a.

2. Install a safety movable door (also known as an explosion-proof door or an overpressure door). When the internal pressure of the pressure Spray Dryer is too large, the movable door will automatically open.

2. Attention should also be paid to the operation of the pressure spray dryer

1. First turn on the centrifugal fan of the pressure spray dryer, and then turn on the electric heating to check for air leakage. Normally, the cylinder can be preheated. The hot air preheating determines the evaporation capacity of the Drying Equipment, without affecting the quality of the drying material. to increase the suction temperature as much as possible.

2. During preheating, the valves at the bottom of the drying chamber of the pressure spray dryer and the discharge port of the cyclone separator must be closed to prevent cold air from entering the drying chamber and reducing the preheating efficiency.