Working principle of single-layer belt dryer Performance characteristics Application range

DW single-layer Belt Dryer working principle performance characteristics application range

The working principle of DW belt Dryer

The material is evenly spread on the mesh belt by the feeder, and the mesh belt is generally made of 12-60 mesh stainless steel wire mesh, which is dragged by the transmission device to move in the dryer. The dryer consists of several units, each unit circulates the hot air independently, part of the exhaust gas is discharged by a special dehumidification fan, and the exhaust gas is controlled by a regulating valve. The process of mass transfer takes away the moisture of the material. The mesh belt moves slowly, and the running speed can be freely adjusted according to the material temperature, and the dried finished product continuously falls into the receiver. The upper and lower circulation units can be flexibly equipped according to user needs, and the number of units can also be selected according to needs.

DW belt dryer performance characteristics

1. The air volume, heating temperature, material residence time and feeding speed can be adjusted to achieve better drying effect.
2. The equipment configuration is flexible, and the mesh belt washing system and material cooling system can be used.
3. Most of the air is recycled, which saves energy.
4. The unique air distribution device makes the hot air distribution more uniform and ensures the consistency of product quality.
5. The heat source can be equipped with steam, heat transfer oil, electricity or coal (oil) hot blast stove.

DW belt dryer application range

1. Dehydrated vegetables

2. Pellet feed

3. MSG

4. Coconut

5. Organic Pigments

6. Synthetic rubber

7, acrylic fiber

8. Medicines

9. Medicinal materials

10. Small wooden products

11. Plastic products

12. Electronic device aging

13. Curing, etc.