Technical introduction of ferric oxide drying device

1. Technical introduction

The rotary single-cylinder Dryer is used to rotate the material through the cylinder and the set lifting plate drives the material to conduct sufficient heat exchange with the high-temperature flue gas, so that the material Drying Equipment has good drying effect, large production capacity and high operation rate. , energy saving and environmental protection, easy operation and maintenance, and long service life of the whole machine, this type of dryer is equipped with a combination of circumferential lifting plates with various angles inside the cylinder, which can greatly improve the heat exchange rate and shorten the drying time. This equipment is equipped with a separate cyclone + pulse filter cartridge dust collector to maximize the dust removal effect and purify the air to ensure environmental safety.
2. Working principle: The cylinder of the Rotary Dryer is arranged at a certain slope from the horizontal. The material enters the cylinder from the feeding port, and is lifted up by the centrifugal force generated by the rotation of the cylinder and the internal device, and conducts sufficient heat exchange with the hot air, so that the temperature of the material continues to rise, and the water is continuously evaporated, which is consistent with the moisture content. The required materials are unloaded from the discharge device, and the gas with water vapor is extracted, so as to complete the entire material drying process and manufacture to meet the national requirements for environmental protection and safety.

3. Material selection

Considering the friction of the material, choose the material carefully